Cadence University Program Member
Oklahoma Christian University is a Cadence University Program Member
Welcome to the home page of the Cadence Users Group at Oklahoma Christian University.
CENG 3013/4013: IC Design and Advanced HDL - Both courses involve designing integrated circuits in Verilog. In Integrated Circuit Design (CENG 3013), aka IC’s I, a small ASIC microprocessor is designed and implemented on a CPLD/FPGA device. In Advanced HDL Design (aka IC’s II), designs of more advanced digital processors, with modern features and higher integration, are explored. Cadence tools are among a number of choices for students to design and simulate these digital circuits.
ELEC 3303 and ELEC 3313: The use of schematic capture and simulation with PSpice is a standard and essential tool for the completion of objectives in the electronics curriculum. Use of these Cadence products have included routine use for homework and lab assignments that require the simulation and analysis of electronic circuits. In addition, Cadence is used in the analysis and design of larger electronic systems. In Intro to Electronics, the students typically analyze and improve the design of H-bridge used for directional movement of mobile robots. In Electronics I, the students typically design a discrete component operational amplifier, and analyze and design an AM Radio.
ELEC3403: Continuous Time Linear Systems. - Op-Amp circuits are simulated and results are compared to laboratory experiments.
ELEC 4732/4743/4753: Systems Design II/III - Cadence/PSpice is used in student Senior Design projects to simulate circuits and document final circuit designs.
ENGR 2544/3313: Introduction to Digital Systems and Electrical Circuit Analysis - Since PSPice is a standard tool used throughout the EE and CE curricula, the students are given an extensive introduction to the tool in Electric Circuit Analysis. Once they have learned basic usage of the tool, the students use PSpice to design and analyze simple active circuits that are then built in the lab to compare measured results with simulations. The final lab project is the design of an integrator to specifications given by the instructor, then simulated and measured for both square wave and sinusoidal inputs.
"Information is provided 'as is' without warranty or guarantee of any kind. No statement is made and no attempt has been made to examine the information, either with respect to operability, origin, authorship, or otherwise. Please use this information at your own risk. We recommend using it on a copy of your data to be sure you understand what it does under your conditions. Keep your master intact until you are satisfied with the use of this information within your environment."
Cadence is a registered trademark of
Cadence Design Systems, Inc.
2655 Seely Avenue
San Jose, CA 95134
Last updated: July 2019